Application process:
• Mixture obtained should be tested prior to mass production usage.
The mixture obtained should cure / harden in 5-20mins at 170 ℃ ± 2 ℃
• No catalyst is required
• The percentage of silicones should be at 7-9% of the mica plate. If the percentage is too high or too low, adjust usage of toluene for fine-tuning. No changes to other compositions.
• After application, the product should be pressed and cured around 200 ℃ for about 2hours.
(Depending on the actual usage conditions.)
• Above steps are for purely recommendations, and in no way guaranteed by our company. Actual use should be adjusted to suit the manufactured products accordingly during manufacturing process.
SiRe-Flexible-2009 (Characteristic )
|
|
|
|
|
Appearance
|
Light yellow, No mechanic impurity
|
|
Content of Solid 105 ℃ /2h(%)
|
50% ± 1
|
|
Viscosity:25 ℃ No 4 cu(second)
|
15 — 30 Seconds
|
|
Curing Time
|
2h/200 ℃
|
|
Solvent
|
Toluene /Isopropyl alcohol
|
|
Additive
|
None
|
|